Wall Mount Range Hoods 900 CFM Ducted / Ductless Kitchen Vent Hoods IKP02

I love the hands free option.
It is so powerful it actually blew some leaves off the deck outside. The noise level is OK.

Beautiful

We installed this 36" 900 cfm vent for our outdoor grill to help remove smoke on our lanai. We used angle irons as a support system to hang this wall mount hood vent. It's sturdy, no rattling and has a good draft. Somewhat noisy at highest level but favorable to fire alarms in house. All in all we love the vent hood, the hand operations are easy and lights are bright for night time use.

Highly recommended! Very satisfied

No doubt about it, this is a quality product! It's packed very well, and the protective film that coats all of the stainless steel finishes is about the most thorough (and tenacious) I've ever seen. I'm in the process of installing this now in a weekend house, and will end up building an enclosure for the exhaust rather than using the supplied chimneys. This is because my new stove placement did not line up with the original vent hood location by about 3 inches, and the chimney was not wide enough to cover it all. (see photo) Also, clearance between top of range hood and existing duct location is really tight in my particular installation.

The instructions are very vague at best, and the anchors supplied made me think, "no way!" I ended up lucky enough to locate two studs within the overall width of the hood, and drilled/saber sawed my own keyhole slots in the back of the range hood itself. (see photo) My slots are toward the bottom, so I also made some clamps as well to hold the top of the hood onto the wall. (see photo) I'll never worry about it falling off the wall for sure.
So it's mounted to the wall now, and I'm really happy with it. It really puts out a breeze! I have not become used to the hand motion necessary to consistently get it to increase or decrease fan speed, but that will come. The light is just right. Quiet for the amount of power it has.
Will update with photos when I get the enclosure completed.
Edit: 2 photos added of custom chimney. I made it no bigger than it had to be to do the job. Still have some trim work to do along the walls and on top where it meets the ceiling beam.