As others have noted, installing this hood under an 8' ceiling is a problem. I opted to use just one of the duct covers. First I drilled holes through the top plate and the supporting 2x4s in the attic to take 4 long bolts. Then I attached the flexible duct to the fan assembly. I attached the top plate to the "angle irons" and then to the fan & hood assembly on the counter top. I then slid the duct cover over from the top. Using the cardboard box it came in and bits of lumber I elevated the hood until the top plate was in position snug on the ceiling. Now the hard part: I crawled into the attic and working through the duct hole, jiggled the top plate around until I could slide the bolts from the bottom through the top plate and 2x4s, and then I installed washers and nuts. Tightening the nuts cinched the assembly nice and firmly to the ceiling.
I think I could have come up with a better design to make installation a lot less challenging. For one, everything is assembled with frustrating tiny little nuts and bolts. Bring your good glasses!
5/17/2024 update: I was contacted by Iktch and they generously resolved the issues I had to my satisfaction. Now that the hood is installed we are very pleased with the looks, performance, and the quality of the product. Updated 3 stars to 5 stars.
Dejar un comentario
Todos los comentarios se revisan antes de su publicación.
Este sitio está protegido por hCaptcha y se aplican la Política de privacidad de hCaptcha y los Términos del servicio.